Small bending, why is it worth changing the structure
2026-09-28
People in the industry all know that the most abrasive sheet metal workshop is often not a large piece, but a small piece of sheet metal. If you change a batch of lists, the master will return to the origin, remold and try to fold them. The angle difference is half a degree, and then go back to adjust. A day down
In recent years, the real bending time is less than half of the working hours, wasting time and energy, and the cost has also increased. Osmar 0G series lower-acting bending machine has changed its thinking: the upper die does not move, and the worktable moves upward with the workpiece. The starting pressure is fast, and there is no need to return to zero mechanically. When changing steps, the tool can enter the next line after leaving the workpiece, and the beat is obviously short. The fuselage has a small opening and compact structure. The OG-35-ton and 50-ton models occupy a small area in the workshop, which is just right for small thin plates, many varieties and small batches of work to be fast and accurate.
The column adopts an integrated welding bed body, which eliminates internal stress by integral tempering, and cooperates with a nested frame of multi-layer and multi-channel welding of robots, which is not easy to flex under long-term heavy load. The angle deviation is submitted to the oblique search type deflection compensation: the numerical control system is as follows
Calculate the compensation amount of the load, drive the wedge block for fine adjustment, and form a pre-convex curve in the length direction of the worktable, which is consistent with the actual deflection, so that the gap between the upper and lower dies is consistent in the full length, and the folded angle is the same from end to end.
Gear stepless fine adjustment can be, do not have to change the mold repeatedly.
In operation, the high-brightness TFT color touch screen supports conversational input of plate thickness, material and angle one by one, and the system automatically calculates the axis position and bending parameters, which is convenient and fast. The foot switch is folded when stepped on and stopped when released, which is very convenient to bend the line. new
The hand follows the interface and the cycle is short. The L-axis is linked with the D-axis, and space is also reserved for docking with ABB and KUKA robots. In the future, there is no need to change machines on the automation line, and the scalability is strong.
Osmar has been focusing on complete sets of sheet metal equipment such as bending machines and laser cutting machines since 2008. It has built an intelligent equipment production base in Gaoming, Foshan. OG series has served industries such as elevators, air conditioners, kitchenware, electrical appliances, communication cabinets, etc. Small bending, faster, more stable, a little more profit, is a good choice for sheet metal processing enterprises.